BAKER TUBULAR FAQ PAGE
-
How are your split seam
spacers, bushings and sleeves manufactured?
Our tubes are manufactured from
sheet steel using high speed punch presses. We have developed a
method to automatically feed the steel into our press. Here the
first stage of the die creates what we term the "first
form", an upside down U-shaped part. This is then indexed
into the second stage of the die where it is formed into a tube by
rolling the part around a mandrel with a punch and die. We purchase
the steel so that the width of the coil will create the length of
part when formed in the press.
-
What type of equipment do you
use in your manufacturing process?
We currently have a number of
straight back punch presses that range in size from 32 ton up to
our most recent addition, a 120 ton Komatsu press.
Baker
Tubular Metal Products
120 South Street, Wilder, KY 41071
(859) 261-8482
(800) 354-8482
Fax (800) 535-6332
E-Mail: WJBaker@bakertubular.com
home
| ISO Cert | services
| dowels
|
split-bushings | quote
request
split
seams | spring
pins | stampings
| wire
connectors | specs
| RoHS | contacts
|
