DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
Split Seam Spacers, Sleeves and Bushings

BAKER TUBULAR METAL PRODUCTS

CERTIFIED TO ISO 9001:2000, WITHOUT  DESIGN 

Site Navigation

Split Seam Spacers

Spring Pins

Wire & Tubing Connectors

RoHS Information

LATEST NEWS FLASH

 

 

Wire and Tubing Connectors (Ferrules)

Wire and tubing connectors, or ferrules, save by using split seam tubes to give greater strength where wires are joined, such as in auto seat springs and display units.

Split seam spacer used in a tubing connector application image

Save by using split seam tubes to connect pipe or tubing from either inside or outside. Specify I.D. or O.D., length, wall thickness, type of metal, finish, and special features such as open or closed seams, soft or spring temper.

Split seam tube used as ferrule for wire connector for display unit and auto seat frame

 

 

Baker Tubular Metal Products
120 South Street, Wilder, KY 41071
(859) 261-8482
(800) 354-8482
Fax (800) 535-6332
E-Mail: WJBaker@bakertubular.com

home | services | dowels |  split-bushings | quote request |RoHS |ISO
split seams | spring pins | multislide stampings | wire connectors | specs | contacts
© 2003 Baker Tubular Metal Products. All rights reserved.